All brass Hot And Cold Water Triangle Valve Flow Control Valve Three-way Valve G1/2 Thread Bathroom Angle Valve

All copper angle valve thickening hot cold water triangle valve universal toile kitchen basin faucet water valve

Hot and cold water triangle valve
Flow control valve
Three-way valve G1/2
Threaded bathroom angle valve
Stainless steel angle valve
Toilet triangle valve

Material: copper ;

packing: carton;

packing size: 10.8 * 5.5 * 4.8cm
Selling points: high quality stainless steel, rust and corrosion resistant, durable;
Two colors are easy to distinguish, blue represents cold water pipeline and red represents hot water pipeline;
Applicable to: bathroom sink, toilet, water heater, sink, etc .;
Simple installation, squeeze clockwise to tighten. When installing, place a suitable amount of bare tape on the thread at the front of the angle valve to adjust the angle of use of the angle valve;

The copper alloy gravity forging is preferred; it is resistant to pressure and explosion, with full materials; it is safe and resistant to pressure; it can easily cope with long-term harsh environments.

Lengthened thread design; increase raw material friction; stable and non-slip;

Installation steps:

1. Arrange the water inlet pipe at a suitable height on the wall;
2; Wrap an appropriate amount of raw material tape on the thread of the inlet pipe; set the decorative cover and screw into the inlet pipe;
3. Use screws to insert the water outlet; screw the water inlet end into the wall inlet pipe;
4. Connect the pipeline water source; check whether the threaded part is sealed;